Fisher Plows

Tuck's Trucks GMC - Authorized Fisher Plow Distributor

Genuine Fisher Snowplow Parts & Service in Hudson, MA

When a New England winter storm is hitting the MetroWest area, you cannot afford downtime. At Tuck’s Trucks GMC, we are your premier local source for authentic Fisher snowplow parts, equipment accessories, and professional repair services.

Whether you are maintaining a single residential truck or managing a massive commercial clearing fleet, our dedicated commercial truck team in Hudson, MA, ensures you have the exact components needed to keep your blades dropping and your routes clear.

In-Stock Fisher Plow Parts & Replacement Components

Don't risk your equipment's longevity with generic aftermarket parts. We carry a comprehensive inventory of OEM Fisher replacement parts designed to fit your exact setup perfectly, including the Fisher HDX™, HD2™, XV2™, and TrailBlazer™ series.

Professional Snowplow Installation & Repair Services

Our factory-trained technicians don’t just service GMC trucks—they understand the heavy electrical and structural demands of commercial plow setups. Bring your rig to our shop right off Route 85 for:

• Pre-Season Inspections: Electrical system load testing, hydraulic fluid flushes, and structural weld inspections.
• Emergency Storm Repairs: Fast-turnaround troubleshooting for electrical failures, broken hoses, or bent frames.
• Custom Rigging & Fleet Setups: Professional installation of brand-new Fisher plows and salt spreaders matched to your truck's exact front gross axle weight rating (GAWR).
• Frequently Asked Questions

Yes, we carry a wide selection of common maintenance hardware for older conventional, MM1, and MM2 detachment systems alongside current generation hardware.

Absolutely. Contact our parts desk directly to organize bulk orders on high-wear items like cutting edges, pins, trip springs, and hydraulic fluid before the winter rush begins.

Contact the Parts Department at Tuck's Trucks GMC today, stop by our shop in Hudson, MA, or call us directly to check real-time stock on the specific Fisher part numbers you need.

Fisher Preseason Maintenance Checklist

Fisher Plow Owners. Are you winter ready? Now is a good time to perform a preseason maintenance check on both your plow and your truck. Here’s a list to get you started.

1. Check all plow fasteners. You’ll find torque recommendations in your Fisher plow owners manual.
2. Check all cotter pins.
3. Inspect all welds.
4. Check cutting edges for uneven wear and replace if necessary.
5. Check all electrical routings and connections. Look for cuts, bends and rubbing.
6. Add dielectrical grease to all electrical connections.
7. Check Hydraulic hoses for leaks, cracks, or damage and that hoses are routed properly.
8. Drain and replace all plow hydraulic fluids annually.
9. Verify that all snowplow functions are working properly. Up, down, left, right, etc.
10. Check all plow lights and turn signals.
11. Make sure all plow mount fasteners/bolts are tight.
12. Test truck battery and clean terminals if corroded.
13. Check tire pressure, engine oil, brake fluid, transmission fluid, radiator fluid and windshield washer level.

Contact Tuck's Trucks GMC Parts Department for any Fisher or GM parts, fluids and accessories needed. Don’t forget to pick up a Fisher emergency parts kit, that will be a real time saver when needed on a cold winter night.

Short on time? Schedule an appointment with Tuck's Trucks GMC service department. Our GM and Fisher trained technicians can do all this preseason maintenance for you. You can schedule an appointment online or call 978-212-2817.

Previous Next

EZ-V Series

The Fisher® EZ-V® V-Plow, with trip-edge design, is purpose-built to provide industry-leading features, performance and efficiency, just like the other v-plows in our lineup. The EZ-V blade's lightweight design is ideal for businesses and homeowners using half-ton trucks such as the GMC® Sierra 1500, Chevrolet® Silverado 1500, Ford® F-150, RAM® 1500, Toyota® Tundra and Nissan® Titan.

EXTREME V Series

Make quick work of brutal winter conditions. Whether busting through a long driveway packed with heavy wet snow or clearing out a parking lot full of cars, the Fisher® XTREMEV™ V-PLOW is trusted for its heavy-duty design and construction. Its rugged moldboard, Fisher trip-edge design and standard double-acting cylinders have made the xtremev the V-Plow snow plow operators bank on. Available in 7' 6", 8' 6" and 9' 6" models.

XV2 Series

Built to tackle the tough jobs, the FISHER® XV2™ V-PLOW is a new standard in snow plowing performance. With a heavy-duty 11/4" center pin, extreme flared wings and ultra-responsive hydraulics, the xv2 delivers outstanding performance. The Fisher trip-edge design protects the plow, truck and operator from the impact of hidden obstacles, and standard instalock double-acting cylinders make back dragging as efficient as a straight blade. Available in 7' 6", 8' 6" and 9' 6" models.

XLS Series

Sure, plowing snow is a "Rush", but it's also a business. The FISHER® XLS™ expandable length snowplow helps get business done fast. At the push of a button, the xls expands from an 8' retracted blade to 10' expanded blade. Angle the leading wing forward for ultra-efficient windrowing or hit the scoop.

HD2 Series

Built for serious snow removal, the HD2™ SNOWPLOW takes the best selling Fisher® Snowplow and makes it even better — with two extra steel reinforcement ribs, a standard steel cutting edge and a full line of accessories. The hd2 snowplow is the new standard in snow removal. Available in 7' 6", 8', 8' 6" and 9' widths.

HS Series

Fisher now has an all steel plow made for your light truck or suv. Fisher's hs snowplow. Weighing as little as 250 lbs., there's no worry about overloading your front end. The Fisher HS is a durable 21 inches tall, with fast responsive hydraulics, allowing you to change the blade position quickly and easily for efficient plowing. Available in 6’8’’ and 7’2” widths.

HDX Series

This is no ordinary straight blade. With an adjustable attack angle and articulating a-frame, the stainless steel HDX™ SNOWPLOW takes straight blade innovation and productivity to a new level. The HDX™ SNOWPLOW. Available in 8' and 9' widths, the 29" tall HDX™ snow plow blade is made from corrosion-resistant stainless steel that performs as good as it looks.

HT Series

Built for half-ton trucks and ready for anything, the HT SERIES™ snow plow means business. Engineered with many of the features that make Fisher® snow plows the choice of the pros, you and your half-ton will be able to tackle any challenge and quickly move on to the next one.

HC Series

Make short work of big storms. The 9' and 10' FISHER® HC HEAVY CONTRACTOR snowplows are built for big trucks and designed to move large amounts of snow. So no matter what contractors or municipality plow drivers get thrown their way, they can move the snow, then move on to the next parking lot or street, time and time again.

MC Series

Vehicles in the 17,000-27,500 GVW range used by municipalities and contractors in non-winter months require serious plowing equipment when the snow starts to fly. That’s when the mc series from fisher is the reliable choice.

SD Series

Sometimes a halfback is called on to throw a block, and though he may be smaller, he's still expected to get the job done right. Fisher® SD Series plows are rugged, hard-working plows built for lighter four-wheel-drive vehicles so that snow removal operators can knock old man winter off his cleats and make short work of the storm in no time flat.

Storm Boxx

The FISHER® 8’, 10, 12', 14' and 16' STORM BOXX™ PUSHER PLOWS feature a two-piece, steel trip-edge design that delivers a cleaner scrape for hard-packed snow and ice—all while protecting operators and their equipment when encountering hidden obstacles. Attaching quickly and easily to backhoes, wheel loaders or tractors by using bolt-on, interchangeable attachment plates, the storm boxx pusher plow goes the distance.

XRS Series

Put your skid-steer to work with an XRS™ WINGED SNOWPLOW. Built to handle the extra demands of skid-steer operation with winged plow performance and simple operation for all experience levels. This plow also offers fast and easy hook up, adding versatility to your snow-clearing arsenal. Clear large parking lots, maneuver between cars and parking islands, and get the most out of your skid-steer this winter.

Minute Mount Tractor Kit

Easily install the FISHER® MINUTE MOUNT® 2 tractor attachment kits on a wide range of tractor models. These kits are compatible with fisher heavy-duty straight blades, v-plows or winged plows, giving you unprecedented maneuverability, versatility and efficiency when plowing.

Trailblazer

Get more use out of your utility vehicle with the FISHER® TRAILBLAZER™ line of UTV Plows. These plows are engineered to fit a wide variety of utvs and to handle the same demands as our commercial plows. Constructed from high-strength, low-alloy steel components, both models feature an easy-on/easy-off utv mounting system and removable receiver brackets for exceptional ground clearance. Trailblazer UTV Plows feature scrape lock for clean scraping and back dragging.

Steel-caster Spreader

Make easy work of snow and ice with a Hopper Spreader that’s purpose-built for half-ton and light duty trucks. Designed in both 0.7 and .35 cubic yard capacities, the all-new steel-caster stainless steel hopper spreaders have all the power and performance of larger steel-caster hopper spreaders, but in a more compact size to better accommodate your smaller spaces and jobs.

POLYCASTER Spreader

Winter storms hit fast and hard. Fight back with the FISHER® POLY-CASTER™ HOPPER SPREADER, loaded with upgraded de-icing technology to get you in and out of the storm quickly. Enhanced controls, a convenient accessory hub and the fleet flex interchangeable electrical system give you the tools you need to make the best use of your deicing materials. Conquer every storm with the easy-to-install poly-caster hopper spreader.

SPEEDCASTER Spreader

Conquer it all with the FISHER® SPEED-CASTER™ 525 or SPEED-CASTER™ 900 tailgate spreaders. Featuring a 2-stage, auger-fed delivery system with independent control of material flow and spread pattern, these tailgate spreaders are designed to deliver the right de-icing material to the right place, and without sacrificing your precious cargo space.

UTV Steel-Caster Spreader

There’s no better way to apply the finishing touch to sidewalks, paths and small driveways than with the new FISHER® STEEL-CASTER™ stainless steel hopper spreader. With a 0.35 cu yd capacity, it’s designed to be the right size for utvs and compact trucks while retaining many of the same features of larger steel-caster hopper spreaders.

UTV POLYCASTER Spreader

There's no better way to apply the finishing touch to sidewalks, paths and driveways than with the FISHER® POLY-CASTER™ UTV hopper spreader. Designed specifically to fit into the bed of a utv, the POLY-CASTER UTV hopper spreader lets you easily address the applications where only a utv can go. Why perform the job with anything else? Turn your utv into a winter workhorse.

Rotary Broom

The FISHER® RB-400 walk-behind rotary broom helps get walkways cleaner by scraping and sweeping snow all the way down to the surface. It's also perfect for areas that are tight up to buildings, curbs or edging. Whether it's just a light dusting, heavy wet snow or compacted snow that was walked on or driven on before you got to the job, the walk-behind rotary broom will take care of the situation quickly and leave you with a clean that is unmatched.

Previous Next